Dartmoor Baker Plus

Baker Plus woodburning stove

Dartmoor Baker Plus

Clear selection
SKU: N/A Category:

The new Baker Plus range raises the height of the Dartmoor Baker stove creating easier access to the oven.

The Dartmoor Baker’s (based on the successful Dartmoor Stove Range) have an integral oven above the fire box utilising the heat from the fire to cook bake or warm delicious food.

The Dartmoor Baker comes in three models, the compact Baker 5 (5kw nominal output) the Baker W5 (5Kw Nominal) and the Baker 8 (8kw nominal) all with a good size oven and three shelf heights.

The Dartmoor Baker’s have oven vents which allow the cooking smells and condensation to be drawn out of the oven and up the chimney. If you would like to use the top of the stove to warm a pan then the use of the back flue outlet is recommended when installing the stove. Using the rear flue outlet will create a clear area, providing extra space and access to the hotter part of the top plate (near the back), a special Dartmoor Baker back adaptor with flue cleaning access can be purchased to achieve this.
All the Dartmoor Baker’s have a removable cleaning plate located inside the oven. This door provides a cleaning access to the top of the oven or for sweeping the chimney when fitted with a top exit flue. Check your chimney sweep is happy to sweep through this access door before installation.

A base plate protector plate is available, helping to reduce the hearth temperature when fitting onto a non-constructional hearth or a heat sensitive hearth material e.g. slate or marble. The Baker 5 must have a base protector fitted when installed on a non-constructional hearth.

The Baker stoves come with stainless steel handles only.
Both the Baker 5 and Baker W5 are approved for the use in smoke controlled areas with a DEFRA kit fitted.

Width 565mm
Height 1000mm
Depth 290mm
Canopy Type Profiled Flat Top
Integral Boiler -
Saddle Boiler -
Flat Back Boiler 9,000BTU
Nominal Stove Output 5KW
Flue Size 125mm
Standard Leg Length 105mm
Efficiency 80.6%
Flue Centre Top (A) 103mm
Flue Centre (B) 685mm
Width 430mm
Height 900mm
Depth 285mm
Canopy Type Profiled Flat Top
Flat Back Boiler 9,000BTU
Nominal Stove Output 5KW
Flue Size 125mm
Standard Leg Length 50mm
Efficiency 82%
Flue Centre Top (A) 100mm
Flue Centre (B) 618mm
Width 565mm
Height 1000mm
Depth 343mm
Canopy Type Profiled Flat Top
Integral Boiler -
Saddle Boiler -
Flat Back Boiler 9,000BTU
Nominal Stove Output 8KW
Flue Size 150mm
Standard Leg Length 105mm
Efficiency 74.9%
Flue Centre Top (A) 115mm
Flue Centre (B) 685mm

Related Products